Panasonic PV-M2738 - Manual (Page 16)

>v Tape Operation
Your Combination VCR is equipped with
several time saving features as well as
convenient automatic functions which
make tape operation easier than ever.
Auto Shut Off
In TV mode, when a broadcast signal is
not received for 5 minutes, the
Combination VCR will automatically
power off (except when LINE INPUT is
selected).
In Playback mode, when a Video signal
is not detected for 5 minutes, the
Combination VCR will automatically
power off and the tape will be rewound.
• This feature is deactivated when any
button on the unit or remote control is
pressed even if there is no signal
present.
Auto Playback
When a tape is inserted, the power turns
on (Auto). If the record fab* is removed,
playback begins (Auto).
Auto Rewind
When a tape reaches its end during
playback or fast forward the Combination
VCR will rewind the tape and go into
Stop mode.
Playback Auto Eject
(Repeat Play is “OFF.”)
When a tape without a record tab* is
played to its end, the Combination VCR
will rewind and then eject the tape.
Memory Rewind Off
When POWER is pressed during tape
rewind, rewinding will be completed even
though the Combination VCR turns off.
* For record tab information, see page 25.
Repeat Play
You can set your Combination VCR up to play a recording over and over.
1
Press MENU to display the MAIN
MENU.
2
Press to select “VCR,”
and then press MENU to display
the SET UP VCR screen.
3
Press AV to select “REPEAT
PLAY,” and then press ►
repeatedly to select “ON” or “OFF.”
LWG0IS3E
SELECT l A » -i ► KEY
SET :MENU KEY
............ SET UP VCR ...................
REPEAT PLAY : OFF
SELECTiA T KEY
SET ;► KEY
END ;MENU KEY
• When REPEAT PLAY ; ON is selected
(the REPEAT indicator lights on the front panel), the Combination
VCR will playback the tape to its end, or until a blank portion of 30
seconds or more is reached. (Erased portions of tape are not
considered blank.) The tape is then automatically rewound and
played again. This operation is repeated until you cancel Repeat Play.
• All function buttons (REW, FF, etc.) are operational during Repeat
Play.
4
Press MENU twice to return to the normal screen.
You may also turn the repeat play feature on and off at the
Combination VCR. During playback, press PLAY/REPEAT
on the Combination VCR once or twice until the REPEAT
indicator tights up (ON), or goes out (OFF).
One Minute Skip
With this feature, you can skip over commercials recorded on a tape.
A
Press ZERO/1 MIN in Play mode.
• The Combination VCR will go into FF search mode and skip over 60
seconds of recorded time. Then, normal playback will resume.
Zero Search
You can reset the Time Counter to zero and then return to that point.
d Press DISPLAY to display the Time
Counter overlay during playback.
b Press COUNTER RESET to reset
the Time Counter to “0:00:00” at the
desired position.
C
Continue playback, rewind, or
fast forward.
d Press ZERO/1 MIN in Stop mode
when you want to return to
“0:00:00.”
STOP 12 : 00AM WNET
0:00:30
SLP
STOP 12:00AM WNET
0:00:00
SLP
The Combination VCR will go into FF or REW mode and stop at the
last point the Time Counter was set to 0:00:00.
16