Panasonic MC-V6602 - Manual (Page 7)

TO ASSEMBLE CLEANER
A
WARNING
ElBctilcal Shock Hazard.
DO NOT plug Into elactical supply until assembly Is complete. Failure to do so could
result In electrical shock or Injury.
ATTACHING HANDLETO VACUI
.
JM CLEANER
The vacuum cleaner main body and handle are packed separately.
1. The handle screw has been
installed for shipping
purposes. Please
remove the.screw
before inserting the
handle. Insert the
handle as shown in
the illustration.
Ensure that the cord
hook is on the back side of
the handle before inserting.
2. Insert the screw that you
have removed. Be sure
the screw is tightened, but
not overtightened.
3. There is a recessed area between
the cord hook base and the handle
that is designed to secure the power
cord during vacuuming.
Always push the power cord down
Into this recessed area to help
keep the power cord from hanging
near the nozzle and being damaged
by the agitator.
Power
Cord —
4, Loosely wrap the power cord
around the cord hook. Secure the
plug head to the cord by pushing
the power cord into the retainer on
the plug head. Place the
cord wrap around
the bottom loop of
Retainer
the cord. (Plug Head)
Cord Wrap
-
7
-