Mlipgi^gflihe dust bag – Panasonic MC-V6602 User Manual

Page 13

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

MlipGi^GfliHE DUST BAG

xÌÌÌ^:3fc'K$SKSS:Ìiffr>j'iii;fМ:М^^

■

■■;

Always operate ths vacuum with a genuine Panasonic Type U3 Standard or U6

Electrostatic dust bag Installed. Panasonic dust bags may be ordered through any

authorized Panasonic dealer. An optional cloth bag is available.

1. Pull outward on the

dust cover grip, located
on thè top of the dust
cover and
remove the

cover,

Oust Cover

Grip

Dust
Cover

—

2. To remove the dust
bag, grasp the card
board portion of №e
dust bag and pull
it out.

3. Spread out the end
of the new dust bag.

NOTE: Pull carefully so
as not to tear the bag at
the folds.

□ o

4. Attach the new dust bag
onto the bag holder by hold

ing the cardboard portion
and pushing back as illus

trated.

5. Reinsert the tab

provided on the end

of the dust cover into
the groove on the dust
compartment to
allow the cover to

rotate closed.

NOTE: The
dust cover
must be
completely
and correctly
installed for proper
operation.

Groove

6. Rotate the dust cover up into the
closed position and press into

place.

NOTE: The dust bag

should not

be caught
between

the tower
edge of the
dust cover and
the gasket as indi
cated by the arrow in
the illustration.