External synchronization, Prevention of blooming and smear – Panasonic GP-MF130 User Manual

Page 12

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

EXTERNAL SYNCHRONIZATION

2 ; 1 Interlace
The GP-MF130 works in 2 : 1 interlace mode

when external 2 : 1 interlaced HDA/D signal

is supplied to pin-fi and pin-7 of the camera

connector (12-pin),

external HDA/D.

Note: If the picture appears disturbed, be sure

to match the phases of falling edges of the

PREVENTION OF BLOOMING AND SMEAR

When the camera is aimed at a bright light, such
as a spotlight, or a surface that reflects bright

light, smear or blooming may appear.Therefore,

the camera should be operated carefully in the
vicinity of extremely bright objects to avoid
smear or blooming.

- 1 0 -