Panasonic PV-M1367AD - Manual (Page 23)

Special VCR Features
Check list before you begin.
□ All connections are made (see page 6).
□ Your Combination VCR is plugged in.
VCR Lock Feature
□/A
STOP j CJECT
VCR LOCK OFF
When activated, this feature prohibits all operations except for timer
recording and tape eject. This feature is used to keep children from
operating the Combination VCR.
Hold down STOP/EJECT
on the Combination VCR
for 7 seconds during Stop
or Power OFF mode.
To Cancel the VCR Lock feature,
Hold down STOP/EJECT
on the Combination VCR for
7 seconds again during Stop
or Power OFF mode.
• VCR Lock mode is cancelled
automatically after 24 hours as long
as the clock is set.
• This feature cannot be activated or
cancelled when a timer or one touch
recording is in progress.
• This feature cannot be activated when the
POWER button on the Combination VCR is
turned OFF (POWER indicator is not lit).
Warning Beeper Feature
When you select BEEPER ON, a short warning will sound each time an
invalid entry or incomplete operation is made.
Push MENU to display
the MAIN MENU. MAIN MENU
Push A T <3 to
select “VCR,” and then
push MENU to display the
SET UP VCR screen.
CL j OCK
SB.ECT KEY
SET :№NU KEY
Push AW to select
“BEEPER,” and then
push [> to select “ON”
or “OFF."
............ SET UP VCR ---
REPEAT PLAY : OFF
SELECT :A ▼ KEY
SET :► KEY
END :M&IU KEY
Push MENU to end, and then push
A V <3 0>to select “EXIT” Now, push
MENU to exit the MAIN MENU.
23