Record on a tape, Selecting the input mode, One touch timer recording (otr) – Panasonic PV-M1367AD User Manual
Page 19: One touch recording (otr), Ricfi
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Record On a Tape
Check fist before you begin.
□
ah
connections are made (see page 6).
□ Your Combination VCR is plugged in.
Selecting the Input Mode
You can select the Input Mode in one of
two ways.
■ Push A T . The display will change
in the order below.
ricfi
—I ir
1 — 2 — 3
(CATV)
LINE-*-
(CATV)
(TV)
-125 or 69
D
a. Push MENU to display the menu.
b. Push A T <3 E^to select “TV,” and
then push MENU to display the SET
UP TV screen.
c. Push A V to select “INPUT SELECT,”
and then push ¡^repeatedly to select
‘TUNER” or “LINE.”
d)'.'
Insert a cassette with record tab
The Combination VCR
power comes on automatically.
or
O
©
©
©
©
©
0
©
©
_©_©_o„
PushA Tor NUMBERED
keys on the remote
control to select a
channel.
• Or, push CH UP/DOWN on the
Combination VCR.
• To record from an outside
source, push A V to select
LINE (see below).
Push SPEED until the
desired speed appears
on-screen (See page 5).
SP = standard Play
LP = Long Play
SLP = Super Long Play
REC
TO SET SPECIFIC REC TIME
PLEASE PUSH REC KEY
Push REC/TIME on the
remote control to start
recording.
• Or, push REC/TIME on the
Combination VCR.
• To edit out unwanted portions,
push PAUSE to pause the
recording in progress. To
release, push PAUSE again.
One Touch Timer Recording (OTR)
The Combination VCR stops recording at a preset time.
In step 4, push REC/TIME repeatedly to set the length of the
recording. Each push will change the time as shown.
02
c
Normal Ree—►0:30—►1:00
D
‘4:00-4—3:00**—2:00^ 1:30-
PROGRAM TIMER indicator lights on the front panel.
STOP
Push STOP on the remote control to stop
recording.
• Or, push STOP/EJECT on the Combination VCR.
While it is possible to ehange the tape speed when you are
recording, there will be some distortion on the tape where the
change occurred.
The remaining recording time can be displayed by pushing
DISPLAY in OTR mode.
After the Combination VCR has been in Rec Pause mode for 5
minutes, it will stop automatically to protect the tape and video
head.
When using DC Power supply, pushing POWER on the
Combination VCR will cancel an OTR (One Touch Recording) in
progress.
19