Panasonic RX-DT650 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

When the Deck 1 pause and record buttons are pressed, tape editing starts by pressing the Deck 2 playback button.
Only normal tape can be used with this unit.

STOREJECT

Take up the leader tape before proceeding. (Refer to page 20).

TAPE

STOP/EJECT

Press TAPE.

Press Deck 1 STOP/EJECT

and insert the tape to be re
corded.

Insert the tape with the side to be re

corded facing you.

Press Deck 2 STOP/EJECT

and insert the tape to be

played back.

Insert the tape with the side to be played
facing you.

r~n~i Select the editing speed by

setting EDITiNG.

HIGH : High speed
NORMAL : Normal speed

Press Deck 1 PAUSE, then
press REC.

Press the Deck 2 PLAY.

Editing is started by means of the synchro-start function.
Do not set the “CD” or “RADIO” function selector during editing.
Do not change the editing selector during editing. The playback
sound may flutter.
Some TV sets generate noise that could be recorded during editing.
To prevent the possibility of this, do not use this unit closer than

1.5 m to a TV set.

To stop the editing:

SrOP£JECT

Press the Deck 1 and Deck 2
STOP/EJECT.

For your reference;

Recording is not affected by changes made to the volume or tone
quality during the recording.

The recording level and the noise reduction effect of the original

(playback) tape will be recorded on the new tape.