Magliner TRAYLESS BOTTLED WATER HAND TRUCKS - Manual (Page 5)

5
B9247
© Copyright 2012 Magline, Inc. REV 5/12
ASSEMBLING THE WHEELS (ALL MODELS)
1. Slide two thick 5/8” washers (Q) on the axle.
2. Slide one wheel (R) onto the axle, making sure the long hub portion is toward the wheel bracket.
3. Slide one thin 5/8” washer (S) on the axle (see Figure 6).
4. Insert one cotter pin (T) through the hole on the end of the axle and spread the ends of the cotter pin apart using
a regular screwdriver and a hammer.
5. Repeat steps 1-4 for the second wheel.
Item Description Qty. Part No.
Q Flat washer - 5/8" (thick) 4 80705
R Wheel 2 Varies
S Washer - 5/8" x 1/32" (thin) 2 80707
T Cotter pin for axle - 1/8" x 1" long 2 81077
Figure 6
YOU ARE NOW READY TO PUT YOUR MAGLINER HAND TRUCK TO WORK.*
Q
T
S
R
*NOTE: Load and unload in the horizontal position only - Do not stand the truck in the upright position
when loaded with water bottles.