Magliner PANEL FOR HAND TRUCK FRAME - Manual

PARTS LIST
INSTALLATION INSTRUCTIONS
1. Remove the four screws that secure the handle using the #3 Phillips head screwdriver and the
7/16" wrench.
2. Snap the back panel into place over the hand truck side rails with the holes positioned at the top.
3. Align the holes in the back panel with the holes in the side rails where the screws were previously
removed.
4. Reinsert the screws to secure the handle and the newly installed back panel and tighten using the #3
Phillips head screw driver and the 7/16" wrench.
TOOLS REQUIRED
• (1) #3 PHILLIPS HEAD SCREWDRIVER
• (1) 7/16" WRENCH
PANEL FOR HAND TRUCK FRAME INSTALLATION
INSTRUCTIONS
DESCRIPTION QTY. PART NO.
Panels for hand truck frame
Back panel formed for hand truck
frame (not carpeted)
1 300339
OR
Carpeted panel for hand truck frame 1 302020