Magliner STATIONARY KEG HOOK - Manual

Parts List
instaLLation instructions
1. Position the keg hook as shown in the illustration.
Note: Make sure to position the keg hook so that the mounting channel is on the bottom of the middle cross
brace on a standard hand truck (Figure 1). For folding hand trucks, be sure to position the keg hook so that the
mounting channel is on top of the middle cross brace (Figure 2).
2. Insert the bolts through the opening in the channel into each of the mounting holes on the middle cross brace and
follow with the washer and the lock nut on the oppostie side. Tighten with the two 1/2" wrenches.
tooLs rEQuirED
• (2) Standard 1/2”
wrencheS
FIGUre 2
kEg hook instaLLation instructions
standard hand truck Folding hand truck
a
a
FIGUre 1
itEM DEscriPtion QtY. Part no.
a Keg hook (includes below) 1 301121K
B hex head cap screw 5/16-18x1-3/4" 2 80014
c Flat washer 5/16" 2 80701
d hex lock nut 5/16"-18 2 80676
B
c
d
d
c
B