Magliner HAND TRUCK WINGS - Manual (Page 2)

CUTOUT FOR OPTIONAL
STAIR CLIMBERS
A
C
D
B
E
PARTS LIST
TOOLS REQUIRED
• (1) #2 PHILLIPS SCREWDRIVER
• (1) 7/16" WRENCH OR SOCKET
WRENCH
• (1) HAMMER
ADDITIONAL TOOLS REQUIRED IF
RETROFIT TO EXISTING TRUCK:
• (1) ELECTRIC DRILL
• (1) 5/16" DRILL BIT
FIGURE 1
2
ITEM DESCRIPTION QTY. PART NO.
A RH 45" hand truck wing 1 302163
B LH 45" hand truck wing 1 302164
C 1/4"-20 x 3/4" long pan head screw 2 80256
D 1/4"-20 x 1-1/4" long pan head screw 2 80104
E 1/4"-20 locknut 4 80675
Note: There may be excess hardware included in kit. Please use chart below to determine correct
screws for your handle choice.
F Handle Screws (all handles except double loop): To be used with:
1/4"-20 x 1-7/8" long pan head screw 4 80039 Handle only
1/4"-20 x 2" long pan head screw 4 80107 Handle with universal brace or Hi-U
1/4"-20 x 2-1/4" long pan head screw 4 80263 Handle with universal brace and Hi-U
F Double Loop Handle Screws:
1/4"-20 x 1-7/8" long pan head screw 2 80039
Double loop handle
1/4"-20 x 2" long pan head screw 2 80107
Wings are not compatible with
the following hand truck options:
• Skid runners
• 4th wheel attachment (W4)
• Wheel guards
F