Dynon Avionics EFIS-D6 Installation Guide - Manual (Page 50)

Appendix
5-20 EFIS-D6 Installation Guide
Appendix F: Weights
Adding any new instrument to an aircraft requires the installer to be aware of its weight and how
that affects the overall weight and balance of the plane. The following are the weights of the
EFIS-D6 and associated Dynon-supplied sensors.
EFIS-D6 .............................................................................................................1 lb 9 oz (0.709 kg)
EFIS-D6 + battery............................................................................................1 lb 15 oz (0.879 kg)
EFIS 25-pin wiring harness ...................................................................................11.2 oz (0.32 kg)
EDC-D10A ............................................................................................................3.6 oz (0.102 kg)
EFIS OAT ................................................................................................................3.2 oz (0.08 kg)
Heated AOA/Pitot Probe & Heater Controller ......................................................11.2 oz (0.32 kg)
Unheated AOA/Pitot Probe......................................................................................5.6 oz (0.16 kg)
Appendix G: EFIS-D6 Specifications
Mechanical
Fits into standard 3 1/8” panel hole
Optional flush mount bracket available
Operating
Temperature
-22° to 122° F (-30° to 50° C)
Power
Voltage: 10 - 30 Vdc
Power:
8 watts typical; 13 watts maximum
Connections Wiring: DB25 male connector
Screen
Type: AMLCD, TFT (Thin Film Transistor)
Backlight: 450 nits
Size: 3.8” diagonal (96 mm)
Resolution: 320 x 240 color pixels
Inputs/Outputs
1 - AOA Audio Alarm
1 - RS-232 bidirectional PC communication and GPS aiding
input
1 - RS-232 serial encoder output