Pickup speed setting, Pickup speed preference, Functional setting operation – Daiwa TANACOM BULL 500 User Manual
Page 24: Pickup speed setting), Attention
22
4.
Press the
MODE BUTTON
to go back to depth readout.
1
2.
Press
MODE BUTTON
again.
3.
Set speed with the power lever.
1.
Press
MODE BUTTON
.
3
MAX
OFF
Pickup speed preference
If the display is at display, then move the power lever
or press
RESET BUTTON
to show the display shown on the
right.
This display is the pickup setting display.
Use
While the power lever is at MAX position,
pressing the
BPICKUP BUTTON
makes the
motor run at the pre-set pickup speed.
Attention
1.
While the
BPICKUP BUTTON
is in use for winding, winding speed is not displayed.
(the figure corresponds
to the case of setting to 5)
Functional setting operation
(6. Pickup speed setting)
4
2