CANOGA PERKINS 9145EMP Network Interface Device Hardware - Manual (Page 42)

9145EMP Network Interface Device Hardware User’s Manual Operation
Interface Management
30
4.2 Interface Management
The 9145EMP is managed locally through the console port and remotely either through the Man-
agement UTP port or inband via the Network Ports. The console port is connected to a VT-100
terminal, through an emulation program, through the RS-232 serial port using a DE-9 cable. UTP
is an out-of-band 10/100 Mbps port supporting Telnet, SSH, and SNMP V1/V2C/V3 that is used
for network management.
4.2.1 Setting Up the VT-100 Terminal
When using the console port, you can use the HyperTerminal Emulation program that is included
with Microsoft Windows operating systems. The Telnet session is only available after the man-
agement TCP/IP configuration is completed.
NOTE: The Microsoft Vista operating system does not include HyperTerminal. If
your terminal interface computer uses Windows Vista, you will need to
use a separate terminal emulation program.
The following steps describe how to set up HyperTerminal on your PC.
1. Select Start>All Programs>Accessories>Communications>HyperTerminal. The New
Connection - HyperTerminal window will open.
2. Enter a name for the connection to the system in the Name box, select an icon to identify
this connection on your desktop, and click OK. The Connect To window will open.
3. Select COM from the Connect using drop down menu, and click OK. The Com1 Proper-
ties window will open.
4. At the COM 1 Properties window, on the Port Settings tab, select the following from the
appropriate dropdown menus, then Click Apply:
• Bits per second: 9600 bps
• Data bits: 8
• Parity: None
• Stop bits: 1
• Flow control: None
5. Click OK. HyperTerminal connects to the system and VT100 terminal emulation starts.
6. In the Hyperterminal window, select the Properties button from the tool bar, select the
Settings tab, select VT100 from the Emulation drop down menu, and click OK.
• The default username is admin.
• The default password is admin (case sensitive).