CANOGA PERKINS 9145EMP Network Interface Device Hardware - Manual (Page 21)

Functional Description 9145EMP Network Interface Device Hardware User’s Manual
Management Ports
9
2.4 Management Ports
2.4.1 EIA-232 Console Port
The console port of the 9145EMP is used for communication between the 9145EMP and a
VT100 terminal or emulator. The console port is a DE-9 female connector with a DCE pin-out,
which can be directly connected to a terminal with a straight through cable (Figure 2-3).
Figure 2-3 EIA-232 Console Port Pinouts
2.4.2 Ethernet Management Port
The Ethernet Management port is used for local management of the 9145EMP. The 9145EMP
has a management interface with an RJ45 UTP connector. The management port can sense and
automatically cross-over the Tx and Rx pairs.
The UTP port is IEEE 802.3 compliant for 10BASE-T and 100BASE-TX and supports the follow-
ing modes of operation:
• 10 Auto
• 100 Auto
1 2 3 4 5
6 7 8 9
TO 9145E CRAFT PORT
DCE
DE9 FEMALE
1 2 3 4 5
6 7 8 9
TO PC SERIAL PORT
DTE
DE9 MALE
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
DCD
RX DATA
TX DATA
DTR
SIG GND
DSR
RTS
CTS
RI