C. Crane UHPR Manual User Manual

Page 23

How to Unavoid a Transmission

NOTE: If you tap and hold Avoid on any submenu pop-up, the Review Avoid List displays. Go to Step 3.

1. Tap the following:

Menu
Advanced Menu
Avoid Options
The Avoid Options screen displays.

2. Tap Review Avoid List. The Review Avoid List displays. (You can also tap and hold Avoid on any

submenu pop-up to display the Review Avoid List.)

3. To unavoid all entries, tap Clear All Avoids on the bottom menu bar and then tap Yes on the Stop

All Avoiding popup dialog box. The Avoid Options screen displays.
To unavoid a single entry, tap that entry and then tap Yes on the Stop Avoiding popup dialog
box. The Review Avoid List screen displays.

4. Tap Listen to return to normal reception or Back to return to the Advanced Menu.

Replay

The Replay function works like an “Instant Replay” of the transmissions you have just heard. You can set
the duration that HomePatrol-1 will buffer these transmissions (30 seconds to 240 seconds) through the
Replay Options menu on the Advanced Menu. You can replay the transmissions but you cannot save
them. When you are finished listening to the replayed transmission, HomePatrol-1 automatically deletes
them.

NOTE: Replay will not work when the battery is low or not installed, regardless of HomePatrol-1’s
connection to AC power.

Set Replay Options

1. Tap the following:

Menu
Advanced Menu
Replay Options

The Replay Option screen displays.

2. Tap Set Replay Duration. Tap again to increase the replay duration by 30 seconds each time you

tap.

3. Tap Listen to return to normal reception or Back to return to the Advanced Menu.

Replay Transmissions

1. Tap Replay on the Feature Navigation bar. HomePatrol-1 plays back transmissions for as long as

the Replay Duration has been set. A Replay screen displays the system/department/channel of
the transmission being replayed.

2. When all transmissions have been replayed, a dialog box asks if you want to play the

transmissions again. Tap Yes to replay the transmissions or No to return to monitoring
transmissions.