C. Crane UHPR Manual - Manual (Page 13)

8
Submenu Definition System Department Channel
Avoid
Blocks HomePatrol-1 from receiving
transmissions for a specific element.
X X X
Sites Provides specific site details. X --- ---
Info
Provides information about that transmission
level.
X X X
Prev
Returns HomePatrol-1 to the previous
transmission.
X X Note
Next Moves HomePatrol-1 to the next transmission. X X X
Fave
Allows you to add that channel to a Favorites
list.
--- --- X
NOTE: Only available during channel hold.
Radio Control Bar
The row of buttons across the top of the Main screen allows you to fine-tune HomePatrol-1 reception,
access Help, and reenter system configuration.
Button Definition
Squelch Sets how strong a signal must be before HomePatrol-1 stops on it.
Range
Controls how many systems HomePatrol-1 tries to receive based on location and
systems’ locations. The lower the number, the fewer the systems and departments
received. A selection bar displays a 30-mile range in 2-mile increments. Each screen tap
equals 0.5 miles.
Atten
(Attenuation) Reduces signal interference if you are in an area where there are a lot of radio signals. If
Attenuation is set to ON, the status indicator turns red.
GPS Displays the status of a connected GPS unit.
Help
Displays Help text.
Tap and hold to redo initial setup configuration.
Status Icons
Three status icons reside in the right corner of the Main screen:
Icon Description
Shows the status of the screen touch lock. Tap to lock (grey color icon)/unlock (gold
color icon) the screen controls.
NOTE: The gold locked icon is the same icon that displays when you lock a
transmission level.
Shows relative signal strength. (Example shows three bars strong)
Battery level/charge status. When AC power is connected, a lightning bolt displays on
the icon.