BendixKing CAS 66A - Manual (Page 40)

TCAS ONLY MODE
In this mode the screen’s
origin point is 1/3 up from
the bottom of the screen.
Only TCAS information is
displayed. This mode is
maintained unless another
mode is manually selected.
The range displayed is that
selected on the TCAS con-
trol panel. A 2 nm range
ring is displayed on ranges
3, 5,10, and 15 nm. The
2 nm range ring consists of discrete dots (cyan) at each of the 12
o'clock positions. The 2 nm range ring is not displayed on ranges 20
and 40 nm; instead, a half-range ring is displayed. The half-range ring
consists of discrete dashes (cyan). The TCAS operational mode is
annunciated in the lower left hand corner of the screen.
Note: On the “TCAS ONLY” display “WX ON” will be annunciated in
the upper right hand corner if the weather radar is transmitting. See
Weather Radar operating guide.
At power-up the screen initially displays the Radar with TCAS Overlay
mode. When the Test mode is selected on the TCAS control panel
the self test pattern is displayed unless TCAS system failures are
detected. If system failures are detected the screen is blanked and a
list of faults is displayed.
WX & TCAS MESSAGE FORMATS
TCAS Mode Annunciations:
TEXT Color Description
TCAS STBY (Blue) TCAS in Standby
TEST (Blue) TCAS in TEST
TA ONLY (Blue) TA ONLY Mode
TA AUTO (Blue) TA ONLY Pop-Up
Note: When the Radar is placed in Standby, the TCAS mode annun-
ciation is moved to the upper right hand corner and the display is in
the WX only or TCAS/WX modes.
Controls and Displays
36 Effective Date 6/94 006-08746-0000 Rev 2
RNG 5
TA ONLY
-05
+25
TCAS I Pilots Guide 2/8/06 3:52 PM Page 36