Kidde i12010SCO - Manual (Page 7)

– Only for smoke alarm Hush
System announces “HUSH MODE CANCELLED” when
unit resumes normal operation after Hush Mode has
been cancelled.
– Only if button is pushed
System announces “CARBON MONOXIDE PREVIOUSLY
DETECTED”
when the unit has detected CO
concentrations of 100 ppm or higher.
– System announces “PUSH TEST BUTTON” when the unit
is powered up, reminding user to activate the Test
Button.
• The End of Product Life Alarm/Signal is a double chirp and flash
every 30 seconds (see page 21).
• End of Life Hush. At end of product life, the button can be
pushed to silence the end of life "chirp" for approximately 3
days at a time, for a maximum of 30 days life extension.
• One “chirp” every 30 seconds coupled with a green LED flash
twice a second is an indication that the alarm is
malfunctioning. If this occurs call the Product Support Line at
1-800-880-6788.
• Test/Reset button performs functions.(See page 14).
• HUSH Control Feature that silences the unit during nuisance
alarm situations (see page 15).
• Peak Level Memory Feature which alerts user when the unit
has detected CO concentrations of 100 ppm or greater (see
page 16).
• Green and red LED lights that indicate normal operation and
alarm status (see page 17 for details).
• Tamper Resist Feature that deters children and others from
removing the alarm (see page 17).
Features
5
2550-7201-01(i12010SCO)_V4.qxd:_ 2014.2.20 10:24 AM Page 7