Kidde 0910 - Manual

Sealed Battery
Smoke Alarm with Smart Hush
TM
• Model 0910 • Part Number 900-0136
LED Indicator
A flashing red indicator light with four modes of
operation: Standby, alarm mode, hush mode and
memory set
Test/Reset Button
One button tests the unit’s circuit operation and resets
memory after an alarm condition occurs
Smart Hush TM Feature
Temporarily silences nuisance alarms. Will not allow
hush to be activated unless unit is in alarm mode.
Battery Operated
No wiring needed
Sealed-In Lithium Batteries
Unit will continue to operate for 10 years
Description
The Kidde 0910 is a 10-year, sealed battery, ionization,
smoke alarm with Alarm Memory and Smart Hush
TM
feature. The innovative design of this alarm’s automatic
activation is unlike any other smoke alarm. The 0910
alarm will automatically activate when it is attached to
the mounting bracket; there are no pull-tabs, no switches,
everything is automatic. At the end of the alarm life, the
unit will chirp, indicating the alarm is in need of replace-
ment. The customer can use a simple tool such as a
screwdriver to deactivate the unit, stopping the low bat-
tery chirp and making it safe for disposal.
The sealed-in board-mounted batteries will power the
0910 unit for its complete 10-year life. No replacement
batteries will ever be needed.
Consumer Benefits
The Kidde 0910 sealed battery operated smoke alarm
features a self-activation mechanism making installation
simple and easy. It also features Smart Hush
TM Control
allowing consumers to temporarily silence nuisance alarms
and an End of Life Alert indicating it is time to replace the
alarm.
At the end of the alarm’s 10-year life, deactivation
of the alarm is just as easy. Using a tool such as a small
screwdriver, a deactivation switch removes power from
the alarm and renders the batteries safe for disposal. The
alarm lockout feature mechanically prevents a deactivated
unit from being mounted back on the mounting bracket.
Features and Benefits
• Sealed-In Lithium Battery – Sealed-in lithium power
supply; no battery replacement required over the 10
year life of the alarm. Eliminates worry about battery
removal or unauthorized deactivation of alarm.
• Self Activation – Alarm automatically activates when
attached to the mounting bracket.
• Alarm Memory – Rapidly flashing LED alerts user if the
alarm has sounded since the last time the test/reset
button was used.
• Smart Hush
TM – Will temporarily silence nuisance
alarms and will not allow hush mode to be activated
unless the unit is in alarm mode.
• Test/Reset Button – Tests unit’s circuit operation and
resets memory after an alarm condition occurs.
• End of Life Warning – Alarm chirps every 30-45
seconds indicating the alarm is in need of replacement.
• Tamper Resist – (when activated upon installation)
effective in preventing someone from removing the unit
from the mounting bracket.
• LED – A flashing red indicator light
with four modes of operation:
standby, alarm mode,
hush mode, and memory set.
10 UL
SIGNALING
LISTED