Kidde 1275E - Manual

120VAC Smoke Alarm with
Battery Backup
• 1275E
Description
The Kidde 1275E is a 120VAC powered ionization
smoke alarm with 9V battery back up. This smoke
alarm has the ability to function as a single unit or in an
interconnected system. The Kidde 1275E features a red
LED to display normal operation and identifies the
origination unit in an interconnected system. The Kidde
1275E includes an Alarm Tamper Resist that inhibits
unauthorized alarm and battery removal. The 1275E is
interconnectable and includes a quick connect power
harness that allows for quick and easy installation.
Consumer Benefits
The Kidde 1275E 120VAC powered ionization smoke
alarm includes a 9V battery back up that provides
continuous protection against smoke and fire hazards
even during power outages. This unit includes a quick-
connect power harness that makes installation fast and
easy. The Kidde 1275E can be operated as a single
station unit or it can be interconnected to up to 24 Kidde
devices (of which 18 can be initiation), including smoke
alarms, CO alarms and heat detectors, strobe lights and
smoke and CO relay modules on one wiring system.
Features and Benefits
• Test Button – Tests unit’s electronic circuitry, horn, and
battery function.
• Quick Connector – Makes installation fast and easy.
• Interconnectable – Interconnect up to 24 Kidde
devices (of which 18 can be initiating) on one wiring
network.
• 9V Battery Backup – Provides protection during a
power outage.
• Alarm Memory – Helps deter alarm
tampering and theft.
• Tamper Resist Locking Pin – Provides a visual
indication when an originating alarm has been
activated.
Test/Reset Button
Tests smoke alarm circuitry and horn and
resets alarm memory
Red LED
Flashes every 30-40 seconds to indicate that
the smoke alarm is operating properly
Green LED
Indicates AC power is present