Storix Software SBAdmin Commands Reference - Manual (Page 47)

Storix System Backup Administrator - 47 - Version 8.2 Commands Reference
strestore
Purpose:
List, verify or restore backup data from a local or remote device
Use on:
Network or TSM Edition Client or Workstation Edition Administrator
Syntax:
strestore <operation> [options] -d {device {–L backupid}} {-t datatype} datalist …
Operations:
-l, --list List contents (of specified backup type)
-r, --restore Restore backup data (default)
-v, --verify Verify backup data (read only)
Options:
-d, --device device Device containing backup data to read. If reading from a TSM
server, specify “-d API” (see –s server).
-D, --dest destination Directory or raw device into which data should be restored.
-f, --showfiles Show filelist during verify or restore
-L, --label backupid The Backup ID of disk backup
-O --owner owner Original TSM client (owner) of the backup to read
-p, --positioned Indicates tape drive is at desired position
-s, --server server Server on which the backup device is attached. If not used, a
local device is assumed. This option is used only on clients in a
Network or TSM Edition environment. When restoring from a
TSM server, specify the server as “TSM@serverName”.
-S, --seq “seqlist” If verifying, you may specify a list of backup sequence numbers
to verify. If restoring, you may specify only one. The default is
sequence number 1 if this flag is omitted.
-t, --type datatype Specify the type of data to list, verify, or restore
datalist … Indicates one or more data elements of the specified datatype to
be verified or restored. You may specify “all” to indicate all data
of the corresponding datatype is to be restored.