Storix Software SBAdmin Commands Reference - Manual (Page 33)

Storix System Backup Administrator - 33 - Version 8.2 Commands Reference
stmakeboot
Purpose:
Create Boot Media for booting a system to the SBAdmin System Recovery process.
Use on:
Network or TSM Edition Client or Workstation Edition Administrator
Syntax:
stmakeboot -t tape {-d dev} [options]
stmakeboot -t disk {-d dev} [options]
stmakeboot -t cdrom {-o output_file} [options]
stmakeboot -t netboot {-d dev} {-l imagename} {-s bootserver} [options]
stmakeboot -t netclient -r {-c client}
Operations:
-r, --remove Remove network boot client configuration indicated with –c option
(default is to add or update existing configuration)
Options:
-a, --hwaddr hwaddr Network adapter hardware address (MAC) to use when adding
network boot configuration
-A, --alt-server IP Alternate server network to use when adding network
configuration
-b, --bootloader loader Linux: Bootloader to use: GRUB (default), LILO, ISOLINUX
-c, --client client Name of client to add or remove network boot configuration
-C, --console console Boot console device name (i.e. tty0,ttyS0, hvc0)
-d, --device device Device name for which to create a boot tape, bootable disk, or
AIX network boot image
-e, --efi-boot Network boot on UEFI firmware (Linux x86 only)
-E, --no-efi Exclude UEFI support (default=include if available)
-g, --gateway gateway Gateway IP to use on network boot client
-k, --kernel kernel AIX: Kernel type (up, mp or 64) used to create boot image
Linux: Kernel filename to use to create boot image (default is
to find kernel for matching release)
Solaris: Not applicable
-I, --image image Name of network boot image name to create or update
-M, --multiboot image Linux: Multiboot image filename needed to boot kernel
-m, --subnet subnet Subnet mask to use on network boot client