Sangean WFR-2D V.1 - Manual (Page 74)

Optical S/PDIF output socket
A digital output socket providing an S/PDIF signal is provided on the rear of your radio for
connection to an amplifier, mini-disc or other equipment with a digital optical input. This feature is
not active for iPod or AUX in modes.
Video out socket
1. Place your iPod/ iPhone on the iPod dock connector
2. Plug in a RCA cable in the jack labeled ‘ VIDEO OUT’ on the back of WFR-2D
3. Connect the plug on the other end of the cable to the respective ‘VIDEO IN’ jack on the back of
your TV.
4. Turn on your iPod/ iPhone and Switch to iPod mode.
Note: This feature is only activate for iPod mode.