Sangean DDR-33+ (V1) User Manual

Page 35

Bass control

1. Press the On / Standby button to switch on the radio. If necessary

press and release the Mode button to put the radio into DAB or

FM mode.

2. Press and release the Menu button to enter the setup menu.

“MANUAL” will appear on the display.(”MANUAL” won’t appear on

the display if you put the radio into FM mode.)

3. Press the Tuning Up or Down button until “EQ” appears on

the display. Press and release the Select button.

4. Press the Tuning Up or Down button until “BASS 0” appears on

the display.

5. To adjust the bass setting press and release the Fast-forward button

or Rewind buttons until the desired level is displayed. Press and

release the Select button, and then your radio will return to the

normal radio display mode.

To quickly cancel the effect of the treble or bass settings press

the Equalizer button until “Flat” appears on the upper line of the

text display. The treble and bass settings will be remembered for

the next time that you wish to adjust them.

Note:

By using the EQ button on the remote control, you can omit the above

1 - 3 steps and only follow 4th and 5th steps for the bass control.