Sangean DDR-33+ (V1) User Manual

Page 14

Manual tuning - DAB

Manual tuning allows you to tune your radio to a particular DAB
frequency in Band III. Any new stations found will be added to the
station list. This function can also be used to assist the positioning
the aerial or the radio to optimise reception for a specific channel
or frequency. Note that UK DAB stations are located in the range of
channels 11B to 12D.

1. Press and release the Menu button so that the display shows
“MANUAL”. Press and release the Select button to enter the manual
tuning mode.

2. Press the Tuning Up or Down buttons to select the desired
DAB channel. Press and release the Select button to tune to the
chosen frequency.

3. If a signal is present, this will be indicated on the signal
strength display. The minimum signal marker ( ) shows the
minimum signal strength needed for good DAB reception. The signal
indicator bars go up or down showing the changing signal strength as
you adjust the telescopic aerial or your radio position. Press and
release the Select button again to return to the normal DAB
tuning mode.

Signal strength display - DAB

1. Press and release the Select button to show the signal
strength display. The minimum signal marker ( ) shows the
minimum signal strength needed for good DAB reception. The signal
indicator bars increase or decrease showing the changing signal
strength as you adjust the telescopic aerial or your radio position.

2. Press and release the Select button to return to the normal
radio display.