Setting the clock format – Sangean WFR-29D (R1) User Manual

Page 61

Setting the clock format

The clock display used in standby mode and on the playing mode screens can be set to 12 or 24

hour format. The selected format is then also used when setting the alarms.

1. With your radio switched on, press the

Menu button to access the menu for the current mode.

2. Rotate the Tuning Control Rotary until 'System settings' is highlighted on the display. Press the

Tuning Control Rotary to enter the system settings menu.

3. Rotate the Tuning Control Rotary until 'Time/Date' is highlighted on the display. Press the

Tuning Control Rotary to enter the time setup.

4. Rotate the Tuning Control Rotary until 'Set format' is highlighted on the display. Press the

Tuning Control Rotary to enter the clock format menu. The current clock display format is

marked with an asterisk.

5. Rotate the Tuning Control Rotary to select either 12 or 24 hour format. Press the

Tuning

Control Rotary to confirm your choice of clock format. The display will then revert to the

previous menu.

If the 12 hour clock format is chosen, the radio will then use the 12 hour clock for the setting of

alarms, and will display a 12 hour clock with an AM or PM indicator when in standby mode.

2-5