Sangean WFR-29D (R1) - Manual (Page 43)

GB
6. Windows will then open a ‘Play to’ window showing the track or tracks to be played. Your computer
will then take control of your radio. Your radio will then enter the Digital Media Renderer mode
(DMR) and after a few seconds the radio will start playing. The display on the radio will show
that it is in DMR mode.
7. While the radio is playing in DMR mode you can use the controls in the ‘Play to’ window on
your computer to skip tracks, fast-forward or rewind, to pause or restart, and to change the
volume on the radio. You may also use the controls on your radio to adjust volume, display
track information (press the Info button) or to change operating mode. It is not possible to skip
tracks or pause playback using the radio’s controls while it is in DMR mode.
8. While playing, you may select additional content within Windows and again use the ‘Play to’
function (see step 3-5). The additional tracks will be added to the playlist in the current ‘Play to’
window. You may also delete or change the order of tracks within the ‘Play to’ window.
9. When you wish to exit DMR mode, simply either switch off your radio or press the mode button
to select a different operating mode.
Don’t forget that in order to reselect the DMR mode and to be able to use ‘Play to’ from Windows
you must first ensure that your radio has an active connection to your network (see step 1 and 2
above).
Note: Some Windows security software can prevent correct operation of the ‘Play to’ function.
Such software may have updates or configuration options which will permit ‘Play to’ to operate
correctly-please consult your anti-virus software supplier. The ‘Play to’ function in Windows 7
has been tested successfully with the WFR-29 radio when using Microsoft’s security Essentials
software without problems.