Dab radio (not available in wfr-29 sold in the us) – Sangean WFR-29D (R1) User Manual

Page 46

DAB Radio (not available in WFR-29 sold in the US)

Using DAB mode for the first time

1. Carefully extend the telescopic aerial.

. Press the

Standby button to switch on the radio. If the radio has been used before the last

used mode will be selected.

. Press the

Mode button as needed so that DAB radio mode is selected on the display.

4. If this is the first time that DAB mode is used a quick scan of the Band III DAB channels will be

carried out. The display will show 'Scanning'. (If the radio has been used before the last used

station will be selected instead.) During the scanning process, as new stations are detected

the station counter will increase and the stations will be added to the list which is stored in the

radio. The bar graph indicates the progress of the scan.

5. When scanning is completed the radio will list the stations found (in numeric-alpha order 0....9...A...Z),

unless it has previously been tuned to a DAB station. Rotate the

Tuning Control Rotary to

scroll through the list of available DAB radio stations. Press the

Tuning Control Rotary to

select the highlighted station. The display may show 'Connecting...' while the radio re-tunes.

Rotate the Volume control knob to set the sound level as needed.

6. If the station list is still empty after the scan the display will show 'Service not available'. If no

stations are found it may be necessary to relocate your radio to a position giving better reception.