Cybex SOLUTION X-FIX User Manual

Page 9

FIRST INSTALLATION

ADJUSTMENT REGARDING THE CHILD‘S HEIGHT

ADJUSTMENT OF THE HEADREST

Warning! The parts of the CYBEX Solution X-fix must not be used alone or

combination with boosters, backrests or headrests from other

manufacturers or of a different product series. In such cases, the

certification expires immediately.

The child seat consists of a booster seat (d) and a backrest (a) with height

adjustable shoulder and headrest. Only the combination of both parts

provides best protection and comfort to your child.

Warning! Please make sure that the plastic parts of the child seat never

get jammed (e.g. in the car door or by adjusting the back seat).

Connect the backrest (a) to the booster (d) by hooking the guide lug (b)

on the axis (c) of the booster (d).

A headrest can only provide the best protection and comfort for your

child if optimally adjusted. Only then it can guarantee the optimal

position of the diagonal belt (f). you can adjust the height of the solution

X-fix headrest (e) in 11 positions. The shoulder rest is attached to the

headrest and does not have to be adjusted separately. You can check

the optimal adjustment of the headrest by trying to fit exactly two fingers

between the headrest and the shoulders of the child.

• Place your child in the child seat.

• pull the adjustment handle (h) in order to unlock the shoulder and headrest.

• Bring the shoulder and headrest (e) in the desired position.

• As soon as you let go of the adjustment handle (h), the shoulder and

headrest (e) locks automatically.

Note! Please keep the instruction manual close by for future reference

(e.g. by storing it under the elastic cover at the rear side of the backrest.)