Cybex SOLUTION X-FIX - Manual (Page 23)

21
CLEANING
DURABILITY OF THE PRODUCT
WHAT TO DO AFTER AN ACCIDENT
It is important to use only an original CYBEX Solution X-fix seat cover since
the cover is also an essential part of the function. You may obtain spare
covers at your retailer.
The CYBEX Solution X-fix was designed to easily fulfill its purpose for
the expected durability (adding up to 9 years). However, since high
fluctuations of temperature might occur and since there might be
unforeseeable exposures to the child seat, it is important to note the
following:
• If the car is exposed to direct sunlight for a longer period of time, the child
seat must be taken out of the car or covered with a cloth.
• Examine all plastic and metal parts of the seat for any damages or changes
about their form or colour on a yearly basis. If you notice any changes,
you need to dispose of the child seat or it must be examined by the
manufacturer and replaced if necessary.
• changes to the fabric, in particular the fading of colour, are normal after
yearlong use in a car and do not constitute a fault.
Note! Please wash the cover before you use it the first time. Seat covers
are machine washable at max. 30°C on delicate cycle. If you wash it at
higher temperature, the cover fabric may lose colour. Please wash the
cover separately and never dry it mechanically! Do not dry the cover in
direct sunlight! you can clean the plastic parts with a mild detergent and
warm water.
Warning! Please do not use chemical detergents or bleaching agents
under any circumstances!
If you had an accident, the seat might have sustained damages which
are not visible. In this case, the child seat must absolutely be examined
by the manufacturer and replaced if necessary.