Cybex SOLUTION X-FIX User Manual

Page 17

Warning! The belt buckle of the car seat (l) must under no circumstances

reach into the bottom belt guide (k). If the belt strap is too long, the child

seat is not suitable for this vehicle.

Warning! The lap belt must, on both sides, run as low across the groin

of your child as possible in order to take optimal effect in case of an

accident.

FASTENING THE SEATBELT OF YOUR CHILD

Put your child in the child seat. Pull out the three-point belt and lead it in

front of your child to the belt buckle (l).

Put the belt guide (m) into the belt buckle (l). If you hear a clicking sound

it is securely locked.

put the lap belt (n) in the bottom belt guides (k) of the child seat. now pull

the lap belt (n) tight by pulling the diagonal belt (f) until there is no slack.

The tighter the belt the better it can protect from injuries. The diagonal

belt and lap belt should both be inserted in the bottom belt guide at the

side of the belt buckle.

The lap belt (n) should be placed in the bottom belt guides (k) on both

sides of the seat (d).

now lead the diagonal belt (f) through the upper red belt guide (g) in the

shoulder rest (e) until it is inside the belt guide.

please make sure that the diagonal belt (f) runs between the outer edge

of the shoulder and your child‘s neck. If necessary, adjust the running

of the belt by adjusting the height of the headrest. The height of the

headrest can still be adjusted in the car.

Note! Teach your child from the beginning to always pay attention to a

tight belt and that it should pull the belt tight by itself if necessary.

Warning! Never twist the belt!