Vernier CBL Made Easy User Manual
Page 22

Step 5
Sending Graphs and Data to the Computer
CBL Made Easy!
18
TI-82:
On the TI calculator, press
2nd
[
LINK
], then select 2:SelectAll-... from the
SEND
menu.
Use
to locate the lists on the
SELECT
menu. Position the arrow in front of a list you want
to send to Logger Pro and press
ENTER
to select it. More than one list may be selected in this
manner. A black square will appear beside each list that will be sent. To deselect, press
ENTER
.
The black square will disappear.
Press
, then select 1:Transmit. The lists will appear in the import window. They will be
labeled with simple list names from the calculator.
TI-85:
On the TI calculator, press
2nd
[
LINK
], then choose <
SEND
>. Press
MORE
, then choose <
LIST
>.
Use
to locate a list you want to send and choose <
SELCT
> to select it. More than one list
may be selected in this manner. A black square will appear beside each list that will be sent. To
deselect, choose <
SELCT
>. The black square will disappear.
Choose <
XMIT
> to transmit the list(s) to the computer. The lists will appear in the import
window. They will be labeled with simple list names from the calculator.
5. Click on the data list(s) that you want to import. (To select more than one list on a Macintosh, hold
down the
key while you click).
6. Click Done to send the data lists to the computer. The data will appear in columns in the data table.
They will be labeled with the simple list names from the calculator. If you want to re-name them or add
units, double-click on the column heading in the data table and enter new labels and units.