Vernier Logger Pro 3 - Manual (Page 6)

2
 Or, Spectrometer
The Vernier Spectrometer measures
intensity and absorbance over many
wavelengths simultaneously.
 Or, Garmin GPS
Select Garmin GPS units can connect
to Logger Pro for live data collection,
or the retrieval of stored tracks
or waypoints.
 Or, Ohaus Balances
Logger Pro allows you to collect
mass data from select models of
Ohaus balances.
and, at least one sensor:
Sensors are connected to the LabPro or Go! Link.
A Stainless Steel Temperature Probe is a good
choice for initial testing of Logger Pro. The Voltage
Probe included with the LabPro interface can also
be used.
 Or, Go! Temp
The Vernier Go!Temp is a temperature
probe that connects directly to the USB
port of your computer. No interface
is needed. This sensor comes with the
Logger Lite software.
 Or, Go! Motion
The Go! Motion is a motion detector
that connects directly to a computer’s
USB port.
 Or, WDSS
The Wireless Dynamics Sensor System
collects acceleration, force, and
altitude data. It requires a Bluetooth-
equipped computer.