Concord Camera 5040 - Manual (Page 19)

18
REPLAYING STORED FILES
REVIEWING THE STORED FILES
You can view the recorded images, video clips and audio clips on the
camera.
1. Press the MODE button repeatedly until the review mode icon ( )
appears on the LCD. The last recorded file appears on the LCD monitor.
2. Press to move to the previous file and press to move to the next file.
3. When a video clip or audio clip is selected, press the SET button to start
playing the file.
MAGNIFYING THE STORED IMAGES
Still images can be magnified up from 1 times to 8 times.
1. When the desired image is shown on the LCD, press to enlarge the
image, and press to zoom out. The zoom factor is shown on the LCD.
2. Press the SET button to confirm the selected magnifying level.
3. Press , ,
or to navigate in the image.
4. Press the SET button again to resume zooming mode.
VIEWING THE STORED FILES IN THUMBNAIL MODE
You can view up to nine files at a time on the LCD monitor.
1. Press the MODE button repeatedly until the review mode icon ( )
appears on the LCD.
2. Press . Up to 9 thumbnail files is shown on the LCD.
3. Press the SET button. The last file is highlighted in red border.
4. Press , ,
or to select the desired file.
5. Press the SET button to display the selected file in full screen size.
PROTECTING THE STORED FILES
You can protect important files from being accidentally erased by locking the files.
Locking Files Individually.
1. Press the MODE button repeatedly until the review mode icon ( )
appears on the LCD.
2. Press or to select the file to be protected.
3. Press the MENU button.
4. Press
to highlight Protect and then press the SET button or to enter
its submenu.
5. Press or to select Single, then press the SET button or to enter
its submenu.
6. Press or to select Yes, then press the SET button to confirm. A key
shape icon will be shown on the LCD, which indicates the file is locked.
The zoom factor is shown
REPLAYING STORED FILES