Rane SEQ 30S (2003 version) - Manual (Page 3)

Manual-1
OPERATORS MANUAL
Quick Start
If this is your first equalizer, please do yourself and your speakers a favor and read at least the first five pages. “An ounce
of prevention...,” and all that.
The SEQ 30S is a stereo equalizer, so adjusting any slider affects both channels simultaneously. Begin by setting all sliders
to their center detent (0 dB), and the INPUT LEVEL to its center detent (0 dB). Try to make more cuts than boosts. After
equalizing, use the EQ switch to compare equalized and non-equalized signal. While EQ is switched to ACTIVE (out), adjust
the INPUT LEVEL to the same level as when EQ is switched to BYPASS (in).
You may use either the XLR or ¼" connectors for Inputs or Outputs. Connect only one INPUT type per channel. The XLR
and ¼" TRS inputs do not sum. You may, however, use both types of OUTPUTS simultaneously if desired.
WEAR PARTS: This product contains no wear parts.
SEQ 30S
STEREO GRAPHIC EQUALIZER
STEREO
EQUALIZER
0
+
12
•
6
•
•
•
6
12
0
+
12
•
6
•
•
•
6
12
12 -12
6 -6
0
SEQ 30S
400 31.5 25 40 63 50 100 80 160 125 250 200 315 12.5k 1k 630 500 800 1.6k 1.25k 2k 3.15k 2.5k 5k 4k 8k 6.3k 10k 20k 16k
INPUT
POWER
+4 OL
LEVEL BYPASS