Rane RPE 228d - Manual (Page 7)

Manual-7
This selection allows you to enter the Project name,
installation Site and System Engineer for a given project. All
of these are printed on the Device Report printouts. Click in
the edit box or hold the Alt key and press the underlined
character to type new names.
Similar to the password, the Site Installation Info is stored
in the computer, not in each unit. The Site Installation Info is
also stored with backup Memories when you save a unit’s
Memories to a file.
System > Edit Installation Info
System > Site Control Panel
Password Security
The RPE can be operated on a daily basis either through a
computer or through the contact closures. To preserve preset
security with a computer operator, the software can be locked
(under
Device), and a system password can be assigned
(under System > Change Password). The default password
is please.
With the device locked, when a user tries to change a
curve, this friendly screen appears.
System > Site Control Panel Setup
Presets can be customized with names, through System >
Site Control Panel Setup. Here each Memory can have a
logical name.
This Site Control Panel is all an operator needs to see to
recall Memories. If only a few presets are required, blanking
an entry in the Site Control Panel Setup removes the button
from this screen, reducing the number of buttons. A password
is not required to operate the RPE from this screen.
If more than 16 Memories are needed, they can be saved
to disk and recalled later under the Device menu. For mobile
sound trucks, presets for a particular venue can be saved to
disk and loaded when returning to that venue. Memory names
are stored in the computer, along with other site information.
These job files are usable for multiple installations. Printouts
of device data, graphs, and curves are also available.