Rane RE 27 - Manual (Page 8)

DIAGRAM 111-2: POWERED MIXER SYSTEM EQUALIZATION
HEAVY LINES INDICATE DIRECT CONNECTlONS TO THE RE 27 AND RE 14. Thinner lines show other
connections for clarity.
IMPORTANT NOTES:
1. Most powered mixers utilize unbalanced outputs, so use shielded 1/4" mono patch cords (or uncoiled
type guitar cords) for all connections to RE 27 or RE 14.
2. Most powered mixers that contain built-in graphic equalizers provide separate inputs and outputs for
thisequalizer. BE SURE TO INSTALL THE BUILT-IN EQUALIZER AS SHOWN TO BYPASS THE BUILT-IN
EQUALIZER, OTHERWISE THINGS COULD GET RATHER MESSY DUE TO INTERACTION BETWEEN
EQUALIZERS. If the built-in equalizer is NOT bypassable, set all mixer-EQ sliders to the center (0 dB)
position and use only the RE 27 or RE 14 sliders for adjustment
3. You can patch a bypassable built-in equalizer into your monitor system by connecting it between the
Monitor Out and the monitor amp input as shown.
7