Rane RE 27 User Manual
Page 15
MISCELLANEOUS
Chassis and Front Panel: Cold rolled steel.
Size: 19"W x 3.5"H x 8.5" rack depth.
Weight: RE 27: 11 Ib net RE 14: 11l Ib net
Frequency Response: 20Hz to 16kHz.
Maximum SPL: 140dB.
Display Range: +1 dB or ±3dB “green” window, selectable.
Measurement Level Range: 70dB to 120dB SPL, calibrated.
Curve Selection: Normal: flat from 40-16kHz, ±.5dB.
House: +3dB boost between 400 Hz & 1.6kHz.
Display Attack Time: Peak Instantaneous.
Frequency Accuracy: ±5% maximum.
Analyzer Filters: ANSI Class II
Pink Noise:
Pseudo-random NMOS digitally-synthesized, 23-bit word length, 1 min. repetition rate.
Output level adjustable to +4dBm. Response: 16Hz to 20kHz, +1 dB; crest factor 4.0.
Microphone: Omnidirectional back-electret condenser type, powered by front panel jack (not
phantom power).
Sensitivity: -65dB.
Subsonic Filter: fixed at 20Hz, 18dB/octave.
Ultrasonic Filter: fixed at 50kHz, 12dB/octave.
Overload Indicator: Red LED, lights at 4dB below clipping.
Signal Present Indicator:
Green LED, lights above -20dBm input.
RE 14 Channel Separation: better than 75dB, 20-20kHz.
RFI Input Filters.
Bypass Switch: Passive (hard-wire type), red LED indicated (bypass=on).
Output Relay: Turn on/off transient control.
ANALYZER SECTION
1 4