Canon DR-7080C - Manual (Page 55)

51
4
Important
Positioning a Document on the Flatbed (Platen Glass)
Use the following procedure to scan on the flatbed (platen glass) when scanning a
book, thick document, very thin document, an OHP (Overhead Transparency)
transparency, or any other document that cannot be scanned using the feeder.
1
Raise the feeder.
Opening Sensor
● Lower the feeder slowly, taking care to avoid pinching your fingers. Failure to do so
might result in personal injury.
● When scanning on the flatbed (platen glass), raise the feeder at least 11.8" (300 mm)
until the opening sensor unit is disengaged.
11.8" (300 mm) or more
4.2 Placing Documents onto the Scanner