Canon DR-7080C - Manual (Page 45)

41
3
3
Select [Exit] from the [File] menu.
How to Start the Job Registration Tool
This section describes the procedure to start and end the Job Registration Tool.
See [Help] in the Job Registration Tool for information on how to use the Job
Registration Tool. Alternatively, for information on scanning procedures using the
Job function, see "Using the Job Mode for Scanning," on p. 59.
● If you are using Windows 2000 or Windows XP, be sure to log on as an Administrator.
● The Job function is not supported on a computer that is running Windows NT. If you
want to use the Job function, run the scanner with a computer running a supported
operating system other than Windows NT.
1
Click the [Start] button, and then click [Programs] - [Canon DR-
7080C] - [Job Registration Tool].
In the case of Windows XP, click [All Programs] - [DR-7080C] -[Job
Registration Tool].
3.3 How to Use the Software
Important