Canon DR-7080C - Manual (Page 53)

49
4
2
Align the edges of the document stack on a flat surface, and then
load the stack into the feeder with the scanning side facing
upwards.
Insert the stack into the feeder as far as it will go, until the document set
indicator lights.
Document Set Indicator
● Make sure the top of the document stack is not higher than the load limitation mark.
Overloading the feeder can cause jamming.
● The feeder is designed to hold approximately 100 sheets of LTR/A4-size standard
copy paper (20 lb bond or 80g/m 2 ).
Load Limitation Mark
● When scanning NCR paper that is 11" x 17"/A3 or other large sizes, as well as paper
that is very thin, the document may occasionally get caught in the paper eject
mechanism. In this case, place some paper (auxiliary paper) in the document eject
tray before scanning the document.
Auxiliary Paper
Important
4.2 Placing Documents onto the Scanner