Canon DR-7080C - Manual (Page 20)

16
Chapter 1 Getting Ready
Part Names
This section describes the names and functions of each part. Before you connect
the DR-7080C, take a few minutes to familiarize yourself with the main parts.
Feeder
q Feeder Cover
Open this cover to clear document jams and clean the rollers. (See pp. 77, 90.)
w Opening Lever
Operate this release lever when opening or closing the feeder cover.
e Document Set Indicator
This indicator lights when there is a document in the document feeder tray.
(See p. 49.)
r Slide Guide
Adjust this guide to the marking on the document size label that indicates the
applicable document size. (See p. 48.)
t Document Feeder Tray
Load documents to be scanned here. (See p. 49.)
y Document Eject Tray
Scanned documents are ejected here. Raise the document feeder tray to
remove ejected documents. (See p. 50.)
u Operation Panel
(See p. 19.)