Feeder capacity – Canon DR-7080C User Manual

Page 51

• If you scan documents with a rough surface, friction between the documents

may cause a paper jam. In this case, select [Flatbed], and then scan the
documents one page at a time.

• When you scan a batch of NCR documents, make sure that they are not stuck

together. If a jam occurs, change the scanning side setting to "Flatbed," and
then scan the document one page at a time.

• To avoid paper jams, damage to documents, and a scanner malfunction, do not

feed the following types of paper. For such documents, scan one page at a time
from the flatbed (platen glass).

Paper with clips or staples

Carbon-backed paper

Coated paper

Extremely thin paper

Paper with binding holes

Wrinkled or creased paper

Curled paper

Torn paper

● Note that mixing documents of different thicknesses and sizes may cause a

malfunction during feeding.

● Documents containing text or pictures within 0.2" (5 mm) of its edges or documents

with a color background may cause erroneous skew detection or automatic size

detection.

Feeder Capacity

Note the following rules when loading a document into the feeder.
● Make sure the top of the document stack is not higher than the load limitation

mark. Overloading the feeder can cause jamming.

● The feeder is designed to hold approximately 100 sheets of LTR/A4-size

standard copy paper (20 lb bond or 80 g/m

Load Limitation Mark

4.1 Documents

Note