US Balance US-250 250g x 0.1g User Manual
Page 2
II. TARE WEIGHING
1. Turn on scale as described above
2. Place the "tare item" on the platform
3. Press [TARE] and wait until "0.0" is displayed
4. Add the "net-weight-item”
III. CALIBRATION
1. Turn on the scale by pressing [ON/OFF] key.
2. Wait until the LCD displays "0.0" and then press and
HOLD [MODE] key for 3 seconds, the LCD will display
“CAL”, and then release the [MODE] key.
3. Press [MODE] key again, the LCD will display “CAL”
followed by the required calibration weight.
4. Add the required calibration weight, the display will
show “PASS” and return to normal weighing mode.
5. Put away the calibration weight and press [ON/OFF] to
turn off the scale and the calibration is finished!
IV. SPECIFICATION
Capacity: 250g/8.818oz/160.8dwt/3858gn
Readability: 0.1g/0.01oz/0.1dwt/1.5gn
Units: g/oz/dwt/gn
Calibration: Auto calibration
Tare range: Tare full capacity
Auto off(default): 30 seconds off
Operation temperature:10-30℃
Display:: LCD 5 1/2 digits
Dimensions: 128Ч77Ч19mm
Weight: 166g
Tested to comply with FCC standards