US Balance US-ACE 100g x 0.01g - Manual

US-ACE USER MANUAL
Thank you for purchasing our digital scales. Please read
all operating instructions carefully before use. This
electronic scale is a precision instrument. With normal
care and proper treatment, it will provide years of
reliable service.
Never load the scale with more than the maximal
capacity. Overloading will permanently damage it!
Avoiding any exposure to extreme heat or cold, your
scale works better when operated at normal room
temperature. Always allow the scale to acclimate to
normal room temperature for at least one hour before
use.
Give your scale sufficient warm up time. Usually 30-60
seconds before calibration to give the internal
components a chance to stabilize.
Keep your scale in a clean environment. Dust, dirt,
moisture, vibration, air currents and a close distance to
other electronic equipment can all cause an adverse
effect on the reliability and accuracy of your scale.
Handle with care. Gently apply all items to be weighed
onto tray top. Although this scale is designed to be quite
durable, try to avoid rough treatment as this may
permanently damage the internal sensor.
Avoid shaking, dropping or otherwise shocking the scale.
This is a precision instrument and must be handled with
extreme care.
ONLY OPERATE THE SCALE ON A STABLE,
VIBRATION FREE SURFACE.
I. OPERATION
1. Place scale on a horizontal flat surface, press
[ON/OFF] key to turn on the scale.
2. Wait until "0.00" is displayed
3. Put the object(s) on the weighing platform