US Balance US-AWE 300g x 0.01g - Manual (Page 2)

CALIBRATION
1. With the scale turned on and placed on a stable surface, press the CAL button and
[200.00] will flash on the display.
2. Place a total of 200g weight on the center of the platform.
4. The LCD display reads [PASS] and then [200.00]. CALIBRATION COMPLETE
5. Remove the weight and turn off the scale.
Repeat this process if something was going wrong. Please check the availability of
weights at the store you bought your scale from.
OPERATING ENVIRONMENT
The optimum operating temperature for the scale is 50-86 F/10-30’C. Rough handling
of the scale will damage the internal sensor; so you must avoid actions such as
shaking or dropping the scale. This is sensitive electronic equipment and will be
affected by things such as moisture, extreme temperature changes, magnetic fields,
careless handling and misuse.
AUTOMATIC SHUT-OFF
The scale will automatically shut-off after 60 seconds of inactivity this is to help
conserve the battery power. We recommend good quality AAA batteries.
Tested to comply with FCC standards