US Balance US-JEWELRY-PRO 20g x 0.001g - Manual (Page 2)

Wait for 3 seconds, Press [UNIT] the display will show the calibration
weight. Place the calibration weight on the platform, then press [UNIT],
the display will show “0SAVE” and the return to weighing mode.
4. Now calibration is finished.
V-FUNCTION SETTINGS
Press [ON/OFF] to turn the power off. Press [T/Z] first, then press [ON/OFF],
While keeping [T/Z] pressed, the display will show A_ON or A_OFF (L-ON or L-
OFF).
When the display show L_ON of L_OFF, press [T/Z] selection display L_ON, this
means auto backlight function is active, press [T/Z] again, the display will show
L_OFF, this means auto backlight function inactive, i.e. shut off backlight
function.
Press [UNIT] key, the display will show A_ON or A_OFF, press [T/Z], selection
display A_ON, this means auto shut off function active. Press [T/Z] again the
display will show A_OFF, this means auto shut off function inactive.
Return to weighing mode:
Press [ON/OFF] to turn the power off, press [ON/OFF] again to turn on the
power and the scale return to the weighing mode.
Tested to comply with FCC standards