Step 5: operating the fire pit – Outdoor Great Room DIY Fire Pit User Manual
Page 6
90246 REV C 6/10/13 6
Using your DIY fire pit is simple. Just follow these easy steps and you’ll be enjoying your fire in no time!
Service and Optional Parts
Part Description
Part Number Includes
20 lb propane conversion kit
DIY-LPK
#43 LP Orifice, 10ft Propane hose with regulator
Heat tempered glass fire gems
CFG-D
One 4lb bag of glass fire gems
(8 bags recommended for DIY-2032, 13 bags for
DIY-2049, 14 bags for DIY-38)
Black Lava rock
LAV-BK
.5 cubic foot bag of black natural lava rock
(2 bags recommended)
Log set for DIY-38,-2032, -2049
CF20-Logs
Decorative log set for DIY-38 or DIY 2032.
2 Sets required for DIY-2049
Electronic igniter
CF-Sparker
One piezoelectric igniter
Electrode and grounding wire
CF-Electrode
Sparker electrode and gounding wire for DIY
burners.
Replacement Control Panel Kit
DIY-
CONTROL
PANEL-KIT
Control panel, Control panel height extender, gas
valve. 2 black screws
Step 5: Operating the Fire Pit
1. Press and hold
sparker button.
Ensure it is sparking.
2. Push and turn
control knob to “ON”
to begin gas flow.
off
On
To Extinguish:
Simply push and turn gas valve to “OFF” position .
Gas should be turned off at the source when not in use or while performing maintenance.
For more information about our products, visit us online at
Or call us at: 1-866-303-4028