Citizen Systems PPU-231II - Manual (Page 80)

— 78 —
(1) 1st byte (Printer information)
Bit Status Hex. Decimal
0 Unused 00 0
1 Unused 00 0
2 Unused 00 0
3
Online status 00 0
Offline status 08 8
4 Unused 10 16
5 Unused 00 0
6
Not in paper feed state triggered by FEED switch 00 0
In paper feed state triggered by FEED switch 40 64
7 Unused 00 0
(2) 2nd byte (Error occurrence information)
Bit Status Hex. Decimal
0 Undefined — —
1
Paper not jammed in Presenter 00 0
Paper jammed in Presenter 02 2
2
No Black mark detection error occurred
(only when “Black mark” is selected).
00 0
A Black mark detection error occurred
04 4
(only when “Black mark” is selected).
3
Auto cutter error not occurred 00 0
Auto cutter error occurred 08 8
4 Unused 00 0
5
Unrecoverable error not occurred 00 0
Unrecoverable error occurred 20 32
6
Auto recovery error not occurred 00 0
Auto recovery error occurred 40 64
7 Unused 00 0
Bit 1: If this error occurs due to paper jam, etc., remove the cause
of the error and press the FEED switch to return to the
normal condition. If this error is caused by the deficiency
of a circuit (disconnection, etc.), pressing the FEED switch
cannot recover the normal operation.